Mitsubishi 3000GT 1991 Service Manual page 736

SERVICE BRAKES
Yes
Turn the ignition switch OFF and
check.
Is there continuity between combination
meter No. 58 and No 59 terminals7
Are instrument panel wiring harness
and body wiring harness connected
properly?
Yes
Broken wire in ECU, valve relay or both
drive circuits. Check both circuits.
Does voltage between
harness connector terminal
No. 14 and ground indicate
battery voltage?
Circuit in combination meter
is broken.
,
Connect connectors firmly.
(Check for pins pulled out or
bent, and repair as needed.)
TSB Revision
No
combination meter from
fuse No. 11 is broken.
Yes