Mitsubishi 3000GT 1991 Service Manual page 603

SERVICE SPECIFICATIONS
Items
Standard value
Rear wheel bearing rotation torque
Setting of T.J. boot length
Final drive gear backlash
Differential gear backlash (Limited slip differential)
Drive pinion rotation torque
With oil seal
New part (with rust-prevention oil)
New part/reusable part (gear oil application)
Without oil seal
New part (with rust-prevention oil)
New part/reusable part (gear oil application)
Limit
Rear axle total backlash
Drive gear runout
mm (in.)
Rear wheel bearing end play
LUBRICANTS
Specified lubricants
I t e m s
Rear axle gear oil Hypoid Gear Oil API classification GL-5 or higher
Above -23°C (-10°F) SAESO, 85W-90,8OW-90
From -34°C (-30°F) to -23°C (-10°F) SAE 8OW, 8OW-90
Below -34°C (-30°F) SAE 75W
B.J. boot grease Repair kit grease
T.J. boot grease
SEALANTS AND ADHESIVES
Drive gear threaded hole
Vent plug
Differential cover
REAR AXLE <AWD> - Specifications
N (Ibs.) [Nm (in.lbs.)l
mm (in.)
mm (in.)
mm (in.)
Nm (in.lbs.)
mm (in.)
mm (in.)
3M Stud Locking Part No. 4170 or equivalent
3M ATD Part No. 8663 or equivalent
TSB Revision
Specifications
12 (2.6) lo.7 (6)] or less
85 +_ 3 (3.35 f .12)
0.11 -0.16(.004-.006)
0.03 - 0.09 (.0012 -.0035)
0.5 - 0.7 (4 - 6)
0.35 - 0.45 (3 - 4)
0.15 - 0.25 (1 - 2)
5 (2)
0.05 (.002)
0.8 (031)
Quantity
125 g (4.41 oz.)
135 g (4.76 oz.)
27-7