Mitsubishi 3000GT 1991 Service Manual page 924

42-52
BODY
(3) Apply battery voltage to terminal 1, and check for continuity
when terminal 3 is grounded.
Continuity no voltage
Continuity with voltage
NOTE
O-O indicates that there is continuity between the terminals.
POWER WINDOW MOTOR
(1) Connect the battery directly to the motor terminal and
check that the slider moves smoothly.
(2) Connect the battery in reverse polarity and check that the
slider moves in opposite direction.
CIRCUIT BREAKER (INCORPORATED IN THE POWER WIN-
DOW MOTOR)
(1) Press the UP switch to fully close the vjindow glass, and
continue to press the switch for 10 seconds.
(2) At the moment that the UP switch is released, press the
DOWN switch. The circuit breaker can be considered good !
if at this time the door window g!ass begins to open within
seconds.
60
TSB Revision
0
0 0