LOWER ARM
REMOVAL AND INSTALLATION
40 Nm
29 ft.lbs.
Removal steps
1. Stabilizer link mounting nut (stabilizer bar
side)
2. Stabilizer link mounting nut (lower arm side)
3. Stabilizer link
l *
4. Self-lockrng nut connecting lower arm ball
joint to knuckle
5. Lower arm mounting nut
6. Lower arm mounting bolt
7. Clamp mounting self-locking nut
8. Clamp mounting bolt (small)
9. Clamp mounting bolt (large)
12. Lower arm
13. Stopper
14. Dust shield
15. Rod bushing
FRONT SUSPENSION
NOTE
For tlghtenrng points marked with *, ftrst temporarily trghten
them, then ground the vehicle and torque to specification
where the vehrcle is empty.
100 Nm