Mitsubishi 3000GT 1991 Service Manual page 395

MANUAL TRANSAXLE <FWD>
Post-installation Operation
Installation of Front Under Cover
l
Supplying of Transmission Oil (Refer to P.22-9.)
l
Filling of Engine Coolant (Refer to GROUP 14-
l
Service Adjustment Procedures.)
Checking Operation of Shift Lever at Each Position
l
Checking the Operation of the Meters and Gauges
l
9. Connection for transaxle mount
l * 11. Mounting stopper
12. Transaxle assembly upper part
coupling bolt
13. Connection for tie rod end
14. Connection for lower arm
ball joint
15. Right member
70 Nm
26 ft.lbs.
16. Starter
17. Drive shaft (Left side),
19. Transaxle stay (Front bank side)
20. Transaxle stay (Rear bank side)
21. Transaxle assembly lower part
22. Transaxle assembly
SERVICE POINTS OF REMOVAL
6. DISCONNECTION OF THE CLUTCH TUBE BRACKET
AND CLUTCH DAMPER ASSEMBLY
Remove the clutch release cylinder and clutch oil line
bracket installation bolt, and then secure at the body side
without disconnecting the oil line coupling.
inner shaft assembly
coupling bolt