Mitsubishi 3000GT 1991 Service Manual page 57

Items
Connecting rod bearing
Oil clearance mm (in.)
Crankshaft main bearing
Oil clearance mm (in.)
Crankshaft
Pin O.D. mm (in.)
Journal O.D.
mm (in.)
Out-of-roundness of journal and pin
mm (in.)
Taper of journal and pin
End play mm (in.)
Oil pressure at curb idle speed
[Conditions: oil temperature is 75 to 90°C
(167 to 194"F)l
Oil pump
Side clearance mm (in.)
Body clearance
Side clearance
Relief spring
Free length mm (in.)
Load 137 N (8.3 Ibs.)] mm (in.)
Drive belt
For alternator (Vehicle without air
conditioner)
Deflection mm (in.)
Inspection
New belt
Used belt
Tension
N (Ibs.)
Inspection
New belt
Used belt
For alternator and air conditioner
compressor
Deflection mm (in.)
Inspection
New belt
Used belt
For power steering pump
Deflection
mm (in.)
Timing belt
Amount of projection of auto tensioner
rod mm (in.)
(distance between the tensioner arm and
auto tensioner body)
ENGINE
Standard value
49.9 (I ,965)
59.9 (2.358)
Less than 0.003 (.00012)
mm (in.)
Less than 0.005 (0002)
0.05 - 0.25 (0020 - .0098)
80 (I 1.4) or more
0.100-0.181 (.0039-.0071)
43.8 (1.724)
40.1 (1.579)
4.0-5.0 (.157- ,197)
350 - 600 (77 - 132)
650 - 850 (143 - 187)
450 - 600 (99 - 132)
3.5-4.0 (1388.157)
9.0 - 11 .o (354 - ,433)
Limit
0.1 (.004)
0.1 (.004)
0.3 (.012)