Mitsubishi 3000GT 1991 Service Manual page 1000

INTERIOR
INSPECTION
INSPECTION OF POWER SEAT SWITCH B
Operate the power seat switch B to check for continuity. ,
NOTE
O-O indicates that there
INSPECTION OF FRONT HEIGHT MOTOR AND REAR
HEIGHT MOTOR
(2) Connect the battery directly to the terminal of the motor
INSPECTION OF LUMBAR SUPPORT MOTOR AND SIDE
SUPPORT MOTOR
(2) Connect the battery directly to the terminal of the motor
(3) Connect the battery with its polarity changed and check to
INSPECTION OF LIMIT SWITCH
(1) Connect the battery directly to the connector terminal of
Seat outer layer
TSB Revision
1
continuity between the terminals
IS
and check to see that the power seat adjuster rotates
smoothly until it strikes the limit switch.
see that the motor rotation is reversed.
and check to see that either of the motors, namely, the
lumbar support and side support, operates.
see that either of the motors, namely, the lumbar support
and side support motors, operates.
each of the front height motor and rear height motor and
move the seat to each of the positions shown below. (Refer
to Inspection of Front Height Motor and Rear Height
Motor.)
2 3 4 5 6 7 8 9