Install Oil Dipstick Guide; Install Turbo Heat Insulator - Toyota 7M-GE Repair Manual

8 SYS NTEM - - Turbocharger
(cl
Install the front exhaust
pipe clamp.
TC-17
10. Ih$TA& NO.1 AIR CLEANER PIPE WITH NO.6 AIR
.-GLEANER HOSE
I .
(a)
Install the No.1 air cleaner pipe with No.6 air cleaner
hose to the No.5 air cleaner hose and turbocharger.
(b) Connect the No.1 air cleaner pipe to bracket with the
bolt.
Torque:
130 kg-cm (9 ft-lb, 13 N-m)
(c) Tighten the No.5 and No.6 air hose clamps.
11 i INSTALL "OIL DIPSTICK GUIDE
'(a) '.'lnstall a new O-ring to the oil dipstick guide.
lb) ,-insert the oil dipstick guide to the No.2 oil dipstick
: '/
guide.
(c) Connect the oil dipstick guide to the turbocharger
with the bolt.
(d) Install the oil dipstick.
12. INSTALL TURBO HEAT INSULATOR
(a) Install the turbo heat insulator and plate washer with
the three nuts.
(b) Connect oxygen sensor connector.
13. INSTALL NO.7 AIR CLEANER HOSE WITH AIR
FLOW METER AND AIR CLEANER CAP
(a) Install the No.7 air cleaner hose with air flow meter
and air cleaner cap.
(b) Install the bolt and tighten the clamps.