Starter Relay; Inspection Of Starter Relay - Toyota 7M-GE Repair Manual

Continuity
Inl
Hi
0
0
0
-
Zontinuity
1.
INSPECT RELAY CONTINUITY
(a) Using an ohmmeter, check that there is continuity
lb)
between terminals 1 and 3.
zt;cqk that there is no continuity between terminals 2
lf Continuity is not as specified, replace the relay.
2.
INSPECT RELAY OPERATION
(a)
Apply battery voltage across terminals 1 and 3.
(b) Using an ohmmeter, check that there
is continuity
between terminals 2 and 4.
If operation is not as specified, replace the relay,