Install Oil Cooler To Lower Tank; Install New O-Ring And Tank - Toyota 7M-GE Repair Manual

-.
COOLING SYSTEM - Radiator
.
ore
Plate
Core plate
XTwisteq
XTwistedl
-
2755:
2.
(MS with A/T)
INSTALL OIL COOLER TO LOWER TANK
(a)
Clean the O-ring contact surface of the
lower: tank
and oil cooler.
(b) Install new O-rings (1) to the oil cooler (2).
(c) Install the oil cooler (2) with the O-rings (1) to the
lower tank (3).
(d) Install the plate washers (41, spring washers (5) and
nuts (6). Torque the nuts (6).
Torque: 220 kg-cm (16 ft-lb, 22 N*m)
(e) Install the pipes (7).
Torque: 150 kg-cm (11 ft-lb, 15 N.mI
NOTE: Face the pipes in the same direction they were
before disassembly.
INSPECT CORE PLATE
Inspect the core plate for damage.
NOTE:
l
If the sides of the core plate groove are deformed,
reassembly of the tank will be impossible. Therefore,
first correct any deformation with pliers.
0 Water leakage will result if the bottom of the core plate
groove is damaged or dented. Therefore, repair or re-
place if damaged.
3. INSTALL NEW O-RING AND TANK
NOTE:
l
Clean the tank and core plate.
l
Inspect the O-ring for twists.