Inspection Of Components; Remove Crankshaft Timing Pulley; Remove Oil Pump Drive Pulley - Toyota 7M-GE Repair Manual

ENGINE MECHANICAL - Timing Belt
Socket Wrench
NO!
1
15. REMOVE CRANKSHAFT TIMING .PULLEY
Using SST and a .socket wrench, remove the crankshaft-
timing pultey.
SST 09213-60017
16. REMOVE OIL PUMP DRtVE PULLEY
Using a screwdriver to hold the pulley, remove the pulley
bolt and pulley.
INSPECTION Oi COMPONENTS
1.
tNSPECT TlMlNG BELT
CAUTION :
l
Do not bend, twist or turn the belt inside out.
l
Do not allow the belt to come into contact with oil,
water or steam.
l
Do not utilize belt tension when installing or remov-
ing the set bolt of the camshaft timing pulley.
If there are defects as shotin in the figures. Check the
foljowing points and replace the timing belt if necessary.
(a) Premature parting
l
Check for proper installation.
l
Check the timing belt cover gasket for damage
and proper installation.
(b) If the belt teeth are crackeb or damaged, check to
see if the camshaft is locked.