Install No.1 Turbo Water Pipe; Install Turbocharger - Toyota 7M-GE Repair Manual

SYSTEM - Turbocharger
TC-15
3.
INSTALL NO.l. TURBO WATER PIPE
Install a new gasket and the No.1 turbo water pipe with
the two nuts.
Torque: 75 kg-cm (65 in.-lb, .7.4 Nom)
4.
INSTALL TURBOCHARGER
(a) Face the new gasket so the protrusion is facing the
rear and install on the exhaust manifold.
(b) Place a new gasket on the oil return hole of the
cylinder block.
(c) Install the turbocharger through the turbocharger
stud bolts and turbo oil pipe stud bolts.
(d)
Temporarily install the four nuts holding the exhaust
manifold and turbocharger.
(e) Temporarily install the turbo oil pipe flange nuts.
(f) %rk;;Trily install the union bolt with two new
(g) Torque the turbocharger mounting nuts.
. Torque: 450 kg-cm (33 f?-lb, 44 N-m)
(h) Torque the turbo oil pipe union bolt and flange nuts.
Torque:
Bolt
350 kg-cm (25 ft-lb, 34 N-m)
Nut 130 kg-cm (9 ft-lb, 13 N-m)