Assembly Of Radiator; Remove Tank And O-Ring - Toyota 7M-GE Repair Manual

COOLING SYSTEM
- Radhtor
co-11
Tank
O-Ring
Core
(b) Pull the tank plates outward.
2.
REMOVE TANi( AND O-RING
(a) Pull the tank upward.
(b) Remove the O-ring.
3. (A/T)
REMOVE OIL COOLER FROM LOWER TANK
(a) (MS)
Remove the pipes.
NOTE:
Make a note of the direction the pipes face.
(b) Remove the nuts, plate washers and oil cooler.
(c) Remove the O-rings from the oil cooler.
ASSEMBLY OF RADIATOR
(See page CO-lo)
1. (MA with A/T)
INSTALL OIL COOLER TO LOWER TANK
(a) Clean the O-ring contact surface of the lower tank
and oil cooler.
_
(b) Install new O-rings (1) to the oil cooler (2).
(c) Install the oil cooler (2) with O-rings (1) to the lower
tank (3).
(d) Install the plate washers (4). and nuts (5). Torque the
nuts (5).
Torque: 220 kg-cm (16 f&lb, 22 Nqn)