Inspection Of Distributor; Inspect Air Gaps; Inspect Pickup Coils - Toyota 7M-GE Repair Manual

lGNlTlON S+S
1
EM - On-Vehicle Inspection ('IM-GE)
INSPECTION 6F DISTRIBUTOR
IG-11
1.
lNSPECT AIR GAPS
Using a thickness gauge, measure the gap between the .
signal rotor and pickup coil projection.
Air gap:
0.2 - 0.4 mm (0.008 - 0.016 in.)
If the gap is not as specified, distributor.
NE Pickup
Gl Pickup
G2 Pickup
INSPECT PICKUP COILS
Using an ohmmeter, check resistance of the pickup coil.
Gl pickup coil resistance:
61-00
G2 pickup coil resistance:
62-G@ 140-18Os1
NE pickup coil resistance:
NE-GO 140-180 0
If the resistance is not as specified, replace the distributor.