Removal And Disassembly Of Oil Pressure Regulator; Inspection Of Oil Pressure Regulator; Assembly And Installation Of Oil Pressure Regulator; Remove Oil Pressure Regulator - Toyota 7M-GE Repair Manual

LUBRICATION SYSTENl
- Qii Cooler and oil Pressure. Regulator (-/M-GE)
LU-17.
._
.
w e
0
LUO48f
REMOVAL AND DISASSEMBLY OF OIL
PRESSURE REGULATOR
(See pages LU-15, 16)
1. DISCONNECT OIL HOSE
2. REMOVE OIL PRESSURE REGULATOR
Remove the two bolts, oil pressure regulator and gasket.
3. REMOVE RELIEF VALVE
Unscrew the plug, and remove the spring, relief valve and
gasket.
INSPECTION OF OIL PRESSURE REGULATOR
INSPECT RELIEF VALVE
Coat the valve with engine oil and check that it falls
smoothly into the valve hole by its own weight.
If it does not, replace the relief valve. If necessary, replace
the oil pressure regulator assembly.
ASSEMBLY AND INSTALLATION OF OIL
PRESSURE REGULATOR
(See pages LU-15, 16)
1. INSTALL RELIEF VALVE
Install the relief valve and spring with the plug and a new
gasket. Torque the plug.
Torque:
375 kg-cm (27 ft-lb, 37 N-m)
2. INSTALL OIL PRESSURE REGULATOR
Install the oil pressure regulator with the two bolts. Torque
the bolts.
Torque:
145 kg-cm (10 ft-lb, 14 N.m)
3, CONNECT OIL HOSE