Install Ps Reservoir Tank; Install Alternator And Adjusting Bar - Toyota 7M-GE Repair Manual

-.
,y. , . P
> .:
(i) install the EGR pipe mounting
bolts.
:i
(k) Install the manifold 'stay mounting bolt.
(I) Connect following hoses:
. 47M-GE)
No.3 water by-pass hose to throttle body
('IM-GTE)
0 Auxiliary air pipe hose to vacuum transmitting pipe
l
No.1 water by-pass hose to ISC valve .
(m) Connect following hoses: .,
. (7M-GE)
Diaphragm hose
0 VSWfor fuel. pressure up)hoses
l
Pressure regulator hose
0 EGR hoses to throttle body and vacuum transmit-
ting pipe.
0 Vacuum transmitting pipe hose to intake chamber
-I
0 BVSV hose to throttle body
(r-r) Connect following wires:
0 ISC valve connector
0 Throttle position sensor connector
0 ('/M-GE)
Cold start injector connector.
(01 Install the PCV pipe.
16. ('IM-GTE)
INSTALL CAM POSITION SENSOR
(See steps 1, 2 on page 10-26)
17. (7M-GTE)
INSTALL PS RESERVOIR TANK
Install the PS reservoir tank with bracket.
18. INSTALL ALTERNATOR AND ADJUSTING BAR
(a) Install the alternator and adjusting bar.
(b) Install the drive belt.
(See page EM-361
(c) Connect the No.3 PCV pipe.