Inspect Bearings; Replace Bearings; Magnetic Switch - Toyota 7M-GE Repair Manual

I
STOGZI ST004
I
SST
0
I /
Terminal c
Continuity
\
ST0024,
~2. IF NECESSARY, REPLACE BEARINQS
(a)
Using SST, remove the bearing.
SST 09286-46011
(b) Using SST and a press, press in a new front bearing.
SST 1 .O kw type 09285-76010
1.4 kw type 09201-41020
(c) Using a press, press in a new rear bearing,
Magnetic Switch
1.
PERFORM PULL-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter, check that there is continuity be-
tween terminal 50 and C.
If there is no continuity, replace the magnetic switch
assembly.
2.
PERFORM HOLD-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter, check that there is continuity be-
tween terminal 50 and the switch body.
If there is no continuity, replace the magnetic switch
assembly.