Installation Of Oil Pump; Install Oil Pump Strainer; Install Oil Pump Outlet Pipe - Toyota 7M-GE Repair Manual

-.
LUBRICATION SYSTEM.-- Oil Pump
LU-13
. .
6. (MAI
INSTALL OIL PUMP STRAINER
(a1 Install a new O-ring to oil pump strainer.
(b) Install the oil pump strainer with the two bolts.
Torque: 130 kg-cm (9 ft-lb, 13 N-m)
/--J Ld
LU0527
7. INSTALL. OIL PUMP OUTLET PIPE
Install the oil pump outlet pipe with a new lock
washer,gasket and the union bolt. Finger tighten the union
bolt.
INSTALLATION OF OIL PUMP
(See page LU-8)
1. INSTALL OIL PUMP
(a) install the oil pump with the bolt. Torque the bolt.
Torque: 220 kg-cm (16 ft-lb, 22 Nam)
(b)
Install the mount bolt holding the oil pump strainer
stay to block.
Torque: 60 kg-cm (52 in.-lb, 5.9 Nsm)
(c) Connect the outlet pipe with the union bolt,
Torque the union bolt and nut.
Torque: 350 kg-cm (25 ft-lb, 34 N-m)
Id) Stake the lock washer.