Removal Of Throttle Body; Inspect Throttle Position Sensor - Toyota 7M-GE Repair Manual

EFI SYSTEM - Air Inductioi System
PI-1 03 -
1 7M-GE
I
7M-GTE
d
c q-rEA
vc
1
I
I
in-7.h
IDL VTA VC
s --I
2. INSPECT THROTTLE POSITION SENSOR
(a) Disconnectthe connector from the sensor.
(b) Insert a thickness gauge between the throttle stop
screw and stop lever.
(c) Using an ohmmeter, measure the resistance between
each terminal.
(d) Reconnect the sensor connector.
./
REMOVAL OF THROTTLE BODY
'.
/
(7M-GE)
1. DRAIN COOLANT FRdM THROTTLE BODY
2. REMOVE ACCELERATOR CONNECTING ROD
3. DISCONNECT VACUUM HOSES
4.
DISCONNECT NO. 2 AND NO. 3 WATER BY-PASS
HOSES
.
1 5. DISCONNECT THROTTLE POSITION SEI
7.
REMOVE THROTTLE BODY BRACKET(S)
6. REMOVE THROTTLE BODY
Remove the four bolts and throttle body with the gasket,