Injectors; On-Vehicle Inspection; Check Injector Operation; Inspect Resistance Of Injector - Toyota 7M-GE Repair Manual

EFI SYSTEM - Fuel System
-.
Injectors --
\
Coil
1 ON-VEHICLE tNSPkTlON
1.
2.
CHECK INJECToR OPERATION
Check operation sound from each injector.
(a) With the engine running or cranking, use a sound
scope to check that there is normal operating noise in
proportion to engine rpm.
(b) If you have no sound scope, you can check the injec-
tor transmission operation with your finger.
If no sound or an unusual sound is heard, check the wiring
connector, injector, resistor or injection signal from the
ECU.
INSPECT RESISTANCE OF INJECTOR
(a) Disconnect the injector connector.
(b) Using an ohmmeter, measure the resistance of both
terminals.
Resistance:
7M-GE 1.8 - 3.4 n
7M-GTE 2.0 - 3.8 Q
If the resistance is not as specified, replace the injector.
(c) Reconnect the injector connector.