User Safety Summary - Xerox PHASER Phaser 7700 User Manual

Phaser 7700 color printer user guide
Hide thumbs Also See for PHASER Phaser 7700:
Table of Contents

Advertisement

User Safety Summary

Your printer and the recommended consumable supplies have been designed and tested
to meet strict safety requirements. Attention to the following notes will ensure the
continued safe operation of your printer.
The Phaser 7700 complies with international safety standards and is certified as a
Class 1 Laser Product. With specific regard to lasers, the equipment complies with laser
product performance standards set by governmental, national, and international
agencies as a Class 1 Laser Product. It does not emit hazardous light, as the beam is
totally enclosed during all modes of customer operation and maintenance.
Electrical Safety
Use the power cord supplied with your printer.
I
Do not use a ground adapter plug to connect the printer to a power source
I
receptacle that lacks a ground connection terminal.
Plug the power cord directly into a properly grounded electrical outlet. Do not use
I
an extension cord. If you do not know whether an outlet is grounded, ask an
electrician to check the outlet.
Warning
Avoid the potential of severe electrical shock by ensuring that the printer is
properly grounded.
Do not place the printer where people may step on the power cord.
I
Do not place objects on the power cord.
I
Do not obstruct the ventilation openings. These openings are provided to prevent
I
overheating of the printer.
Warning
Do not push objects into slots or openings on the printer. Making a contact
with a voltage point or shorting out a part could result in fire or electrical
shock.
If you notice unusual noises or odors, switch off the printer power immediately.
I
Disconnect the power cord from the electrical outlet. Call an authorized service
representative to correct the problem.
The power cord is attached to the printer as a plug-in device at the back of the
I
printer. In the event it is necessary to remove all electrical power from the printer,
disconnect the power cord from the power receptacle.
Note
Leaving the printer on is recommended for optimum performance, and does
not pose a safety hazard.
xii
Phaser 7700 Color Printer

Advertisement

Table of Contents
loading

This manual is also suitable for:

7700dn - phaser color laser printer

Table of Contents