Recommended Ipv6 Acl Configuration Procedure; Configuring A Time Range - HP 1920 Series User Manual

Recommended IPv6 ACL configuration procedure

Configuring a time range

1.
2.
3.
Downloaded from www.Manualslib.com
Step
3. Configuring a rule for a basic IPv4
4. Configuring a rule for an advanced IPv4
5. Configuring a rule for an Ethernet frame header
Step
1. Configuring a time range.
2. Adding an IPv6 ACL.
3. Configuring a rule for a basic IPv6
4. Configuring a rule for an advanced IPv6
Select QoS > Time Range from the navigation tree.
Click the Add tab.
Figure 445 Adding a time range
Configure a time range as described in
manuals search engine
Remarks
ACL.
Required.
ACL.
Complete one of the following tasks according to
the ACL category.
ACL.
Remarks
Optional.
Add a time range. A rule referencing a time range takes
effect only during the specified time range.
Required.
Add an IPv6 ACL. The category of the added IPv6 ACL
depends on the ACL number that you specify.
ACL.
Required.
ACL.
Complete one of the tasks according to the ACL category.
Table 137.
453