HP 1920 Series User Manual page 363

2.
Verifying the configuration
After the user passes authentication and gets online, use the ping command to test whether ACL 3000
takes effect.
1.
2.
3.
Downloaded from www.Manualslib.com
Select the authentication method CHAP.
c.
d. Click Apply.
Figure 331 Configuring 802.1X globally
Configure 802.1X for GigabitEthernet 1/0/1:
a. In the Ports With 802.1X Enabled area, click Add.
b. Select GigabitEthernet1/0/1 from the Port list.
c. Click Apply.
Figure 332 Configuring 802.1X for GigabitEthernet 1/0/1
From the navigation tree, select Network > Diagnostic Tools.
The ping page appears.
Enter the destination IP address 10.0.0.1.
Click Start.
manuals search engine
350