Configuring Switch B
Configure Switch B in the same way Switch A is configured. (Details not shown.)
Configuration guidelines
When you configure VLANs, follow these guidelines:
•
•
•
•
Downloaded from
www.Manualslib.com
Figure 145 Assigning GigabitEthernet 1/0/1 to VLAN 2 and to VLANs 6 through 50 as a
tagged member
As the default VLAN, VLAN 1 can be neither created nor removed manually.
You cannot manually create or remove VLANs reserved for special purposes.
Dynamic VLANs cannot be removed on the page for removing VLANs.
You cannot remove a VLAN that has referenced a QoS policy.
manuals search engine
149