HP 1920 Series User Manual page 490

Table 150 Recommended QoS policy configuration procedure
Recommended queue scheduling configuration procedure
Recommended rate limit configuration procedure
Recommended priority mapping table configuration procedure
Downloaded from www.Manualslib.com
Step
1. Adding a class
2. Configuring classification rules
3. Adding a traffic behavior
4. Configure actions for the behavior:
Configuring traffic mirroring and traffic redirecting
for a traffic behavior
Configuring other actions for a traffic behavior
5. Adding a policy
6. Configuring classifier-behavior associations for the
policy
7. Applying a policy to a port
Step
1. Configuring queue scheduling on a port
Step
1. Configuring rate limit on a port
Step
1. Configuring priority mapping tables
manuals search engine
Remarks
Required.
Add a class and specify the logical relationship
between the match criteria in the class.
Required.
Configure match criteria for the class.
Required.
Add a traffic behavior.
Use either method.
Configure various actions for the traffic behavior.
Required.
Add a policy.
Required.
Associate the traffic behavior with the class in the
QoS policy.
A class can be associated with only one traffic
behavior in a QoS policy. Associating a class
already associated with a traffic behavior will
overwrite the old association.
Required.
Apply the QoS policy to a port.
Remarks
Optional.
Configure the queue scheduling mode for a port.
Remarks
Required.
Limit the rate of incoming packets or outgoing packets
of a physical port.
Remarks
Required.
Set priority mapping tables.
477