Configuring Mstp On A Port - HP 1920 Series User Manual

Configuring MSTP on a port

1.
2.
3.
Downloaded from www.Manualslib.com
Item Description
Selects whether to enable TC-BPDU guard.
When receiving topology change (TC) BPDUs, the device flushes its forwarding
address entries. If someone forges TC-BPDUs to attack the device, the device
will receive a large number of TC-BPDUs within a short time and frequently
tc-protection
flushes its forwarding address entries. This affects network stability.
With the TC-BPDU guard function, you can prevent frequent flushing of
forwarding address entries.
HP recommends not disabling this function.
Sets the maximum number of immediate forwarding address entry flushes the
tc-protection threshold device can perform within a certain period of time after receiving the first
TC-BPDU.
From the navigation tree, select Network > MSTP.
Click the Port Setup tab.
Figure 181 MSTP configuration on a port
Configure MSTP for ports as described in
Table 60 Configuration items
Item Description
STP Selects whether to enable STP on the port.
Sets the type of protection to be enabled on the port:
•
Protection Not Set—No protection is enabled on the port.
•
Edged Port, Root Protection, Loop Protection—For more information, see
manuals search engine
Table 60, and then click Apply.
195
Table 61.