Configuring Priority Mapping Tables - HP 1920 Series User Manual

Configuring priority mapping tables

1.
2.
3.
Table 161 Configuration items
Downloaded from www.Manualslib.com
Item
Rate Limit
Direction
CIR
Please select port(s)
Select QoS > Priority Mapping from the navigation tree.
Figure 473 Configuring priority mapping tables
Configure a priority mapping table as described in
Click Apply.
Item
Mapping Type
Input Priority Value
Output Priority Value
Restore
manuals search engine
Description
Enable or disable rate limit on the specified port.
Select a direction in which the rate limit is to be applied.
•
Inbound—Limits the rate of packets received on the specified port.
•
Outbound—Limits the rate of packets sent by the specified port.
•
Both—Limits the rate of packets received and sent by the specified port.
Set the committed information rate (CIR), the average traffic rate.
Specify the ports to be configured with rate limit.
Click the ports to be configured with rate limit in the port list. You can select
one or more ports.
Table
Description
Select the priority mapping table to be configured:
•
CoS to Queue.
•
DSCP to Queue.
Set the output priority value for an input priority value.
Click Restore to display the default settings of the current priority mapping
table on the page.
To restore the priority mapping table to the default, click Apply.
487
161.