Switching To The Management Level - HP 1920 Series User Manual

4.
Table 19 Configuration items

Switching to the management level

A non-management level user can switch to the management level after providing the correct super
password.
The level switching operation does not change the access level setting for the user. When the user logs
in to the Web interface again, the access level of the user is still the level set for the user.
To switch to the management level:
1.
2.
3.
4.
Figure 74 Switching to the management level
Downloaded from www.Manualslib.com
Click Apply.
Item Description
Select the operation type:
•
Create/Remove Create—Configure or change the super password.
•
Remove—Remove the current super password.
Password Set the password for non-management level users to switch to the management level.
Confirm Password Enter the same password again.
Select the password encryption type:
•
Reversible—Uses a reversible encryption algorithm. The ciphertext password can be
Password
decrypted to get the plaintext password.
Encryption
•
Irreversible—Uses an irreversible encryption algorithm. The ciphertext password
cannot be decrypted to get the plaintext password.
Select Device > Users from the navigation tree.
Click the Switch To Management tab.
Enter the correct super password.
Click Login.
manuals search engine
88