Configuring An Snmp Group - HP 1920 Series User Manual

4.
5.

Configuring an SNMP group

1.
2.
Downloaded from www.Manualslib.com
Figure 107 Creating an SNMP Community
Configure the SNMP community as described in
Click Apply.
Table 35 Configuration items
Item Description
Community Name Set the SNMP community name.
Configure SNMP NMS access right:
•
Access Right
•
Specify the view associated with the community to limit the MIB objects that
View
can be accessed by the NMS.
Associate the community with a basic ACL to allow or prohibit the access to
ACL
the agent from the NMS with the specified source IP address.
Select Device > SNMP from the navigation tree.
Click the Group tab.
The Group tab appears.
Figure 108 SNMP group
manuals search engine
Table 35.
Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
Read and write—The NMS can perform both read and write operations to
the MIB objects when it uses this community name to access the agent.
118