Configuring Authorized Ip; Configuration Procedure - HP 1920 Series User Manual

Configuring authorized IP

The authorized IP function associates the HTTP or Telnet service with an ACL to filter the requests of clients.
Only the clients that pass the ACL filtering can access the device.

Configuration procedure

1.
2.
3.
4.
Table 133 Configuration items
Downloaded from www.Manualslib.com
From the navigation tree, select Security > Authorized IP.
Click Setup to enter the authorized IP configuration page.
Figure 439 Authorized IP configuration page
Configure authorized IP as described in
Click Apply.
Item Description
Associate the Telnet service with an IPv4 ACL.
IPv4 ACL
To configure the IPv4 ACL to be selected, select QoS > ACL IPv4.
Telnet
Associate the Telnet service with an IPv6 ACL.
IPv6 ACL
To configure the IPv6 ACL to be selected, select QoS > ACL IPv6.
Associate the HTTP service with an IPv4 ACL.
Web
IPv4 ACL
(HTTP)
To configure the IPv4 ACL to be selected, select QoS > ACL IPv4.
manuals search engine
Table 133.
443