Ipsetup Ipv6; Password - HP 1920 Series User Manual

# Create VLAN-interface 1 and assign 192.168.1.2 to the interface, and specify 192.168.1.1 as the default
gateway.
<Sysname> ipsetup ip-address 192.168.1.2 24 default-gateway 192.168.1.1

ipsetup ipv6

Syntax
ipsetup ipv6 { auto | address { ipv6-address prefix-length | ipv6-address/prefix-length }
[ default-gateway ipv6-address ] }
Parameters
auto: Enables the stateless address autoconfiguration function. With this function enabled,
VLAN-interface 1 can automatically generate a global unicast address and link local address.
address: Enables manual configuration of a global unicast IPv6 address for VLAN-interface 1.
ipv6-address: Specifies an IPv6 address.
prefix-length: Prefix length in the range of 1 to 128.
default-gateway ipv6-address: Specifies the IPv6 address of the default gateway. With this argument
and keyword combination configured, the command not only assigns an IPv6 address to the interface,
but also specifies a default route for the device.
Description
Use ipsetup ipv6 auto to enable the stateless address autoconfiguration function so a global unicast
address and link local address can be automatically generated.
Use ipsetup ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length } [ default-gateway
ipv6-address ] to manually assign an IPv6 address to VLAN-interface 1.
Examples
# Create VLAN-interface 1 and enable VLAN-interface 1 to automatically generate a global unicast IPv6
address and link local address.
<Sysname> ipsetup ipv6 auto
# Create VLAN-interface 1 and assign 2001::2 to the interface, with the prefix length 64, and specify
2001::1 as the default gateway.
<Sysname> ipsetup ipv6 address 2001::2 64 default-gateway 2001::1

password

Syntax
password
Parameters
None
Description
Use password to modify the login password of a user.
Examples
# Modify the login password of user admin.
<Sysname> password
Downloaded from www.Manualslib.com manuals search engine
26