Adding A Class - HP 1920 Series User Manual

Recommended priority trust mode configuration procedure

Adding a class

1.
2.
3.
4.
Table 151 Configuration items
Downloaded from www.Manualslib.com
Step
1. Configuring priority trust mode on a port
Select QoS > Classifier from the navigation tree.
Click the Add tab to enter the page for adding a class.
Figure 463 Adding a class
Add a class as described in
Click Add.
Item Description
Classifier Name Specify a name for the classifier to be added.
Specify the logical relationship between rules of the classifier.
•
and—Specifies the relationship between the rules in a class as logic AND. The
device considers a packet belongs to a class only when the packet matches all the
Operator rules in the class.
•
or—Specifies the relationship between the rules in a class as logic OR. The device
considers a packet belongs to a class as long as the packet matches one of the rules
in the class. The device does not support this operator.
manuals search engine
Remarks
Required.
Set the priority trust mode of a port.
Table 151.
478