End-To-End Qos; Traffic Classification - HP 1920 Series User Manual

End-to-end QoS

Figure 454 End-to-end QoS model
As shown in
and congestion avoidance are the foundations for a network to provide differentiated services. Mainly
they implement the following functions:
•
•
•
•
•
Among these QoS technologies, traffic classification is the basis for providing differentiated services.
Traffic policing, traffic shaping, congestion management, and congestion avoidance manage network
traffic and resources in different ways to realize differentiated services.
This section is focused on traffic classification, and the subsequent sections will introduce the other
technologies in details.

Traffic classification

When defining match criteria for classifying traffic, you can use IP precedence bits in the type of service
(ToS) field of the IP packet header, or other header information such as IP addresses, MAC addresses, IP
protocol field and port numbers. You can define a class for packets with the same quintuple (source
address, source port number, protocol number, destination address and destination port number for
example), or for all packets to a certain network segment.
Downloaded from www.Manualslib.com
Traffic classification
Traffic policing
Traffic policing
Congestion management Congestion management
Congestion avoidance Congestion avoidance
Traffic shaping
Traffic shaping
Figure 454, traffic classification, traffic policing, traffic shaping, congestion management,
Traffic classification—Uses certain match criteria to organize packets with different characteristics
into different classes. Traffic classification is usually applied in the inbound direction of a port.
Traffic policing—Polices particular flows entering or leaving a device according to configured
specifications and can be applied in both inbound and outbound directions of a port. When a flow
exceeds the specification, some restriction or punishment measures can be taken to prevent
overconsumption of network resources.
Traffic shaping—Proactively adjusts the output rate of traffic to adapt traffic to the network resources
of the downstream device and avoid unnecessary packet drop and congestion. Traffic shaping is
usually applied in the outbound direction of a port.
Congestion management—Provides a resource scheduling policy to arrange the forwarding
sequence of packets when congestion occurs. Congestion management is usually applied in the
outbound direction of a port.
Congestion avoidance—Monitors the usage status of network resources and is usually applied in
the outbound direction of a port. As congestion becomes worse, it actively reduces the amount of
traffic by dropping packets.
manuals search engine
Traffic classification
Traffic policing
Traffic policing
WAN
Congestion management
Congestion management
Congestion avoidance Congestion avoidance
Traffic shaping
Traffic shaping
468