HP 1920 Series User Manual page 447

NOTE:
Configurations on the host and RADIUS servers are not shown.
Configuring a RADIUS scheme
1.
2.
3.
Downloaded from www.Manualslib.com
Create a RADIUS scheme:
a. From the navigation tree, select Authentication > RADIUS.
b. Click Add.
c. On the page that appears, configure a RADIUS scheme:
Enter the scheme name system.
−
Select the service type Extended.
−
Select Without domain name from the Username Format list.
−
d. Click Apply.
Configure the primary authentication server in the RADIUS scheme:
a. In the RADIUS Server Configuration area, click Add.
b. Configure the primary authentication server:
− Select the server type Primary Authentication.
− Enter the IP address 192.168.1.2, and enter the port number 1812.
Enter name in both the Key field and the Confirm Key field.
−
c. Click Apply.
Figure 425 Configuring the RADIUS authentication server
Configure the primary accounting server in the RADIUS scheme:
a. In the RADIUS Server Configuration area, click Add.
b. Configure the primary accounting server:
− Select the server type Primary Accounting.
− Enter the IP address 192.168.1.2, and enter the port number 1813.
Enter money in both the Key field and the Confirm Key field.
−
manuals search engine
434