Configuration Procedures; Configuring A Static Aggregation Group; Configuring A Dynamic Aggregation Group; Creating A Link Aggregation Group - HP 1920 Series User Manual

Configuration procedures

Configuring a static aggregation group

Configuring a dynamic aggregation group

Creating a link aggregation group

1.
2.
Downloaded from www.Manualslib.com
Step
1. Creating a link aggregation
2. (Optional.) Displaying aggregate
interface information.
Step Remarks
Create a dynamic aggregate interface and configure member ports for the
dynamic aggregation group automatically created. LACP is enabled
1. Creating a link
automatically on all the member ports.
aggregation group.
By default, no link aggregation group exists.
2. (Optional.) Displaying
aggregate interface
Display detailed information of an existing aggregation group.
information.
Set LACP priority for the local system and link aggregation member ports.
3. (Optional.) Setting
Changes of LACP priorities affect the aggregation state of the member ports.
LACP priority.
The default port LACP priority and system LACP priority are both 32768.
4. (Optional.) Displaying
Display detailed information of LACP-enabled ports and the corresponding
LACP-enabled port
remote (partner) ports.
information.
From the navigation tree, select Network > Link Aggregation.
Click Create.
manuals search engine
Remarks
Create a static aggregate interface and configure member
ports for the static aggregation group.
group.
By default, no link aggregation group exists.
Display detailed information of an existing aggregation
group.
208