5.
Configuring the NMS
The configuration on the NMS must be consistent with that on the agent. Otherwise, you cannot perform
corresponding operations.
To configure the NMS:
1.
2.
3.
Downloaded from
www.Manualslib.com
Figure 119 Enabling SNMP traps
Configure a target host SNMP traps:
a.
Click Add on the Trap tab page.
The page for adding a target host of SNMP traps appears.
b.
Select the IPv4/Domain option and type 1.1.1.2 in the following field, type public in the
Security Name field, and select v1 from the Security Model list.
c.
Click Apply.
Figure 120 Adding a trap target host
Configure the SNMP version for the NMS as v1 or v2c.
Create a read-only community and name it public.
Create a read and write community and name it private.
manuals search engine
126