Managing Services - HP 1920 Series User Manual

Managing services

1.
2.
3.
Table 102 Configuration items
Downloaded from www.Manualslib.com
Select Network > Service from the navigation tree to enter the service management configuration
page, as shown in Figure
Figure 293 Service management
Enable or disable services on the page.
Click Apply.
Item
Enable FTP
service
FTP
ACL
Enable Telnet
Telnet
service
Enable SSH
SSH
service
Enable SFTP
SFTP
service
Enable HTTP
HTTP
service
manuals search engine
293.
Table 102 describes the detailed configuration items.
Description
Enable or disable the FTP service.
The FTP service is disabled by default.
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Enable or disable the Telnet service.
The Telnet service is disabled by default.
Enable or disable the SSH service.
The SSH service is disabled by default.
Enable or disable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
Enable or disable the HTTP service.
The HTTP service is enabled by default.
315