HP 1920 Series User Manual page 135

3.
4.
5.
6.
7.
Downloaded from www.Manualslib.com
Figure 112 Traps configuration
Select Enable SNMP Trap.
Click Apply to enable the SNMP trap function.
Click Add.
The page for adding a target host of SNMP traps appears.
Figure 113 Adding a target host of SNMP traps
Configure the settings for the target host as described in
Click Apply.
Table 38 Configuration items
Item Description
Set the destination IP address.
Destination IP Address
Select the IP address type: IPv4 or IPv6, and then type the corresponding IP
address in the field according to the IP address type.
manuals search engine
Table 38.
122