Enabling The Dhcp Relay Agent On An Interface - HP 1920 Series User Manual

3.
4.
Table 95 Configuration items

Enabling the DHCP relay agent on an interface

1.
2.
3.
4.
Table 96 Configuration items
Downloaded from www.Manualslib.com
Configure the DHCP server group as shown in
Click Apply.
Item Description
Enter the ID of a DHCP server group.
Server Group ID
You can create up to 20 DHCP server groups.
Enter the IP address of a server in the DHCP server group.
IP Address
The server IP address cannot be on the same subnet as the IP address of the DHCP
relay agent. Otherwise, the client cannot obtain an IP address.
From the navigation tree, select Network > DHCP to enter the default DHCP Relay page shown
in Figure 274.
In the Interface Config field, click the
in Figure 276.
Figure 276 Configuring a DHCP relay agent interface
Configure the DHCP relay agent on the interface as shown in
Click Apply.
Item Description
Interface Name This field displays the name of a specific interface.
DHCP Relay Enable or disable the DHCP relay agent on the interface.
Enable or disable IP address check.
With this function enabled, the DHCP relay agent checks whether a requesting
Address Match Check
client's IP and MAC addresses match a binding (dynamic or static) on the DHCP
relay agent. If not, the client cannot access outside networks through the DHCP
relay agent. This prevents invalid IP address configuration.
Correlate the interface with a DHCP server group.
Server Group ID
A DHCP server group can be correlated with multiple interfaces.
manuals search engine
Table 95.
icon of a specific interface to enter the page shown
Table
301
96.