Configuring Igmp Snooping Port Functions - HP 1920 Series User Manual

Configuring IGMP snooping port functions

1.
2.
3.
4.
Downloaded from www.Manualslib.com
Item Description
Enable or disable the IGMP snooping querier function.
On an IP multicast network that runs IGMP, a Layer 3 device acts as an IGMP
querier to send IGMP queries and establish and maintain multicast forwarding
entries, ensuring correct multicast traffic forwarding at the network layer.
Querier
On a network without Layer 3 multicast devices, IGMP querier cannot work
because a Layer 2 device does not support IGMP. To address this issue, you can
enable IGMP snooping querier on a Layer 2 device so that the device can
generate and maintain multicast forwarding entries at the data link layer,
providing IGMP querier functions.
Query interval Configure the IGMP query interval.
General Query Source IP Specify the source IP address of general queries.
Special Query Source IP Specify the source IP address of group-specific queries.
From the navigation tree, select Network > IGMP snooping.
Click the Advanced tab.
Figure 231 Configuring IGMP snooping port functions
Configure the parameters as described in
Click Apply.
manuals search engine
Table 84.
258