HP 1920 Series User Manual page 97

3.
4.
Configuring GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as the source ports
1.
2.
3.
4.
5.
6.
7.
Configuring GigabitEthernet 1/0/3 as the monitor port
1.
2.
3.
4.
Downloaded from www.Manualslib.com
Enter 1 for Mirroring Group ID, and select Local from the Type list.
Click Apply.
Click Modify Port.
Select 1 – Local from the Mirroring Group ID list.
Select Mirror Port from the Port Type list.
Select both from the Stream Orientation list.
Select 1 (GigabitEthernet 1/0/1) and 2 (GigabitEthernet 1/0/2) on the chassis front panel.
Figure 70 Configuring the source ports
Click Apply.
A configuration progress dialog box appears.
After the success notification appears, click Close.
Click Modify Port.
Select 1 – Local from the Mirroring Group ID list.
Select Monitor Port from the Port Type list.
Select 3 (GigabitEthernet 1/0/3) on the chassis front panel.
manuals search engine
84