HP 1920 Series User Manual page 408

4.
5.
Table 122 Configuration items
After retrieving a certificate, you can click View Cert corresponding to the certificate from the PKI
certificates list to display the contents of the certificate.
Downloaded from www.Manualslib.com
Figure 375 PKI certificate retrieval page
Configure the parameters, as described in
Click Apply.
Item Description
Domain Name Select the PKI domain for the certificate.
Certificate Type Select the type of the certificate to be retrieved, which can be CA or local.
Click this box to retrieve a certificate in offline mode (that is, by an out-of-band means like
Enable Offline
FTP, disk, or email), and then import the certificate into the local PKI system.
Mode
The following configuration items are displayed if this box is selected.
Get File From Specify the path and name of the certificate file to import:
Device
•
If the certificate file is saved on the device, select Get File From Device and then specify
the path and name of the file on the device. If no file is specified, the system, by
default, gets the file domain-name_ca.cer (for the CA certificate) or
domain-name_local.cer (for the local certificate) under the root directory of the device.
Get File From PC
•
If the certificate file is saved on a local PC, select Get File From PC and. then specify
the path and name of the file and specify the partition that saves the file..
Enter the password for protecting the private key, which was specified when the
Password
certificate was exported.
manuals search engine
Table 122.
395