HP 1920 Series User Manual page 132

3.
4.
5.
Downloaded from www.Manualslib.com
Click Add.
The Add SNMP Group page appears.
Figure 109 Creating an SNMP group
Configure SNMP group as described in
Click Apply.
Table 36 Configuration items
Item Description
Group Name Set the SNMP group name.
Select the security level for the SNMP group:
•
NoAuth/NoPriv—No authentication no privacy.
•
Auth/NoPriv—Authentication without privacy.
Security Level
•
Auth/Priv—Authentication and privacy.
IMPORTANT:
For an existing SNMP group, its security level cannot be modified.
Read View Select the read view of the SNMP group.
Select the write view of the SNMP group.
Write View
If no write view is configured, the NMS cannot perform the write operations to all
MIB objects on the device.
Select the notify view (the view that can send trap messages) of the SNMP group.
Notify View
If no notify view is configured, the agent does not send traps to the NMS.
Associate a basic ACL with the group to restrict the source IP address of SNMP
ACL packets. To restrict the intercommunication between the NMS and the agent, you
can allow or prohibit SNMP packets with a specific source IP address.
manuals search engine
Table 36.
119