Adding A Policy - HP 1920 Series User Manual

Adding a policy

1.
2.
3.
4.
Downloaded from www.Manualslib.com
Item
CIR
CBS
Discard
Red
Pass
Filter
Select QoS > QoS Policy from the navigation tree.
Click the Add tab to enter the page for adding a policy.
Figure 468 Adding a policy
Add a policy as described in
Click Add.
manuals search engine
Description
Set the committed information rate (CIR), the average traffic rate.
Set the committed burst size (CBS), number of bytes that can be sent in
each interval. This function is not supported in the current software
version, and it is reserved for future support.
Set the action to perform for exceeding packets.
After selecting the Red box, you can select one of the following options:
•
Discard—Drops the exceeding packet.
•
Pass—Permits the exceeding packet to pass through.
This function is not supported in the current software version, and it is
reserved for future support.
Configure the packet filtering action.
After selecting the Filter box, select one item in the following list:
•
Permit—Forwards the packet.
•
Deny—Drops the packet.
•
Not Set—Cancels the packet filtering action.
Table 156.
483