Adding An Ipv4 Acl - HP 1920 Series User Manual

4.
Table 137 Configuration items

Adding an IPv4 ACL

1.
2.
3.
4.
Downloaded from www.Manualslib.com
Click Apply.
Item Description
Time Range Name Set the name for the time range.
Start Time Set the start time of the periodic time range.
Set the end time of the periodic time range. The end time must
End Time
be greater than the start time.
Periodic
Time Range
Sun, Mon,
Select the day or days of the week on which the periodic time
Tue, Wed,
range is valid. You can select any combination of the days of
Thu, Fri,
the week.
and Sat.
Set the start time and date of the absolute time range. The time
From of the day is in the hh:mm format (24-hour clock), and the date
is in the MM/DD/YYYY format.
Absolute
Set the end time and date of the absolute time range. The time
Time Range
of the day is in the hh:mm format (24-hour clock), and the date
To
is in the MM/DD/YYYY format. The end time must be greater
than the start time.
Select QoS > ACL IPv4 from the navigation tree.
Click the Add tab.
Figure 446 Adding an IPv4 ACL
Add an IPv4 ACL as described in
Click Apply.
manuals search engine
Table 138.
454
You can define
both a periodic
time range and
an absolute
time range to
add a
compound time
range. This
compound time
range recurs on
the day or days
of the week
only within the
specified
period.