Setting Terminal Parameters - HP 1920 Series User Manual

NOTE:
•
•

Setting terminal parameters

To configure and manage the switch, you must run a terminal emulator program on the console terminal.
The following are the required terminal settings:
•
•
•
•
•
•
To set terminal parameters, for example, on a Windows XP HyperTerminal:
1.
2.
3.
Downloaded from www.Manualslib.com
The serial port on a PC does not support hot swapping. When you connect a PC to a powered-on switch,
connect the DB-9 connector of the console cable to the PC before connecting the RJ-45 connector to the
switch.
When you disconnect a PC from a powered-on switch, disconnect the DB-9 connector of the console
cable from the PC after disconnecting the RJ-45 connector from the switch.
Bits per second—38,400
Data bits—8
Parity—None
Stop bits—1
Flow control—None
Emulation—VT100
Select Start > All Programs > Accessories > Communications > HyperTerminal.
The Connection Description dialog box appears.
Enter the name of the new connection in the Name field and click OK.
Figure 15 Connection description
Select the serial port to be used from the Connect using list, and click OK.
manuals search engine
21