HP 1920 Series User Manual page 229

•
•
•
Downloaded from www.Manualslib.com
Do not assign the following types of ports to Layer 2 aggregate groups:
MAC address authentication-enabled ports.
port security-enabled ports.
packet filtering-enabled ports.
Ethernet frame filtering-enabled ports.
IP source guard-enabled ports.
802.1X-enabled ports.
Deleting a Layer 2 aggregate interface also deletes its aggregation group and causes all member
ports to leave the aggregation group.
When a load sharing aggregation group becomes non-load-sharing because of insufficient load
sharing resources, one of the following problems might occur:
The number of Selected ports of the actor is inconsistent with that of the partner, which might
result in incorrect traffic forwarding
The peer port of a Selected port is Unselected, which might result anomalies in upper-layer
protocol and traffic forwarding.
manuals search engine
216