D-Link xStack DES-6500 Cli Manual page 95

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To remove VID 10 from instance ID 2:
D E S - 6 5 0 0 : 4 # c o n f i g s t p i n s t a n c e _ i d 2 r e m o v e _ v l a n 1 0
C o m m a n d : c o n f i g s t p i n s t a n c e _ i d 2 r e m o v e _ v l a n 1 0
S u c c e s s .
D E S - 6 5 0 0 : 4 #
delete stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete STP instance ID 2 from the Switch.
D E S - 6 5 0 0 : 4 # d e l e t e s t p i n s t a n c e _ i d 2
C o m m a n d : d e l e t e s t p i n s t a n c e _ i d 2
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config stp priority
Purpose
Syntax
Description
Parameters
D E S - 6 5 0 0 : 4 #
Used to delete a STP instance ID from the Switch.
delete stp instance_id <value 1-15>
This command allows the user to delete a previously configured STP
instance ID from the Switch.
<value 1-15> - Enter a value between 1 and 15 to identify the
Spanning Tree instance on the Switch.
Only Administrator-level users can issue this command.
Used to update the STP instance configuration.
config stp priority <value 0-61440> instance_id <value 0-15>
This command is used to update the STP instance configuration
settings on the Switch. The MSTP will utilize the priority in selecting
the root bridge, root port and designated port. Assigning higher
priorities to STP regions will instruct the Switch to give precedence to
the selected instance_id for forwarding packets. The lower the priority
value set, the higher the priority.
priority <value 0-61440> - Select a value between 0 and 61440 to
specify the priority for a specified instance ID for forwarding packets.
The lower the value, the higher the priority. This entry must be
divisible by 4096.
91