D-Link xStack DES-6500 Cli Manual page 43

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
D E S - 6 5 0 0 : 4 # s h o w s n m p u s e r
C o m m a n d : s h o w s n m p u s e r
U s e r n a m e
- - - - - - - - - - - - - - -
i n i t i a l
T o t a l E n t r i e s : 1
D E S - 6 5 0 0 : 4 #
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
Used to display information about each SNMP username in the SNMP
group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only Administrator-level users can issue this command.
G r o u p N a m e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i n i t i a l
Used to assign views to community strings to limit which MIB objects and
SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community strings to
limit which MIB objects an SNMP manager can access.
<view_name 32>  An alphanumeric string of up to 32 characters that
identifies the SNMP view that will be created.
<oid>  The object ID that identifies an object tree (MIB tree) that will be
included or excluded from access by an SNMP manager.
included  Include this object in the list of objects that an SNMP manager
can access.
excluded  Exclude this object from the list of objects that an SNMP
manager can access.
Only Administrator-level users can issue this command.
V e r A u t h P r i v
V 3 N o n e N o n e
39