D-Link xStack DES-6500 Cli Manual page 330

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#show pim
Command: show pim
PIM Global State
Last Hop SPT Threshold
RP SPT Threshold
Register Probe Time
Register Suppression Time : 60
PIM Interface Table
Interface IP Address
------------ ------------------ --------------- -------- -------- ---- --------
System 10.90.90.90/8
Total Entries: 1
DES-6500:4#
show pim neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the PIM neighbors:
: Disabled
: 0 packet per second(switch to SPT tree immediately)
: 0 packet per second(switch to SPT tree immediately)
: 5
Designated
Router
10.90.90.90
Used to display PIM neighbors of the Switch.
show pim neighbor {ipif <ipif_name12> | ipaddress
<network_address>}
This command will display the PIM neighbor table for the Switch.
<ipif_name 12> - Enter the name of the IP interface for which to display
PIM information regarding PIM neighbors.
ipaddress <network_address> - Enter the IP address of a PIM neighbor
for which to display information.
Adding no parameters to this command will display all PIM neighbors
that probed the Switch.
None.
Hello
Interval Interval Mode State
30
326
J/P
60 DM Disabled